Hoverboard Won’t Turn Off? Here Are the Easy Fixes

Is your hoverboard stuck in the “on” mode and won’t power down no matter what you try? A hoverboard that refuses to turn off can be incredibly frustrating. Not only does it drain the battery unnecessarily, but it also poses safety risks if the device overheats. Luckily, there are some simple troubleshooting steps you can take to get your hoverboard turning off properly again.

In this comprehensive guide, we’ll walk through the most common reasons why hoverboards get stuck on and provide easy solutions to fix a hoverboard that won’t turn off. We’ll also cover important safety precautions to keep in mind.

Why Won’t My Hoverboard Turn Off?

There are several potential root causes behind a hoverboard that won’t power down:

  • Hardware issue with the power button
  • Software glitch or bug
  • Battery or charging problems
  • Safety mechanism triggered

We’ll dive into each of these potential issues and how to resolve them.

Fixing a Faulty Power Button

Hoverboard Won't Turn Off

One of the most frequent culprits is an issue with the physical power button itself. If the button is stuck down, isn’t making full contact when pressed, or has gotten worn out, it can prevent the hoverboard from successfully turning off.

Here are some troubleshooting steps for a faulty power button:

  • Check for debris – Inspect the power button closely and use a toothpick to gently pry out any dirt, dust or grime that may be obstructing the button mechanism.
  • Spray contact cleaner – Use a can of compressed air or an electrostatic-safe contact cleaner to clean inside the button housing and remove any built-up residue.
  • Replace the button – If cleaning doesn’t resolve the issue, the power button will likely need to be replaced. You’ll need to unscrew the hoverboard housing to access and swap out the faulty power button component. This can be tricky for novices, so you may need help from the manufacturer or repair shop.

Resolving Software Glitches

Another common reason hoverboards get stuck powered on is due to a software bug or glitch in the hoverboard’s programming. This can cause the system to freeze up and ignore the power off command.

Here are the steps to try to clear a software glitch:

1) Force a Hard Reboot

  • Locate the reset button or hole on your hoverboard, usually found near the charging port.
  • Use a paperclip or other thin tool to depress and hold the reset button for 10-15 seconds. This will force the device to fully power cycle and clear any frozen state.

2) Perform a Factory Reset

  • If a hard reboot doesn’t work, you’ll need to do a full factory reset to wipe all settings and start fresh.
  • The reset procedure varies by hoverboard model, but often involves holding a sequence of buttons while powering on.
  • Consult your hoverboard’s user manual for the specific reset instructions.

3) Update Firmware

  • Firmware updates often contain bug fixes and stability improvements.
  • Hook your hoverboard up to your computer and check if there are any firmware updates available to download and install.

Battery and Charging Problems

A drained or faulty battery can also keep a hoverboard stuck in an “on” state if it’s not properly detecting the charge level. Charging issues like loose connections can also prevent the hoverboard from recognizing when to shut off.

To fix battery and charging problems:

  • Fully charge the battery – Plug in the hoverboard and allow it to charge to 100% to ensure the battery isn’t simply drained.
  • Inspect charger and port – Check that the charger cable is firmly plugged into both the wall outlet and the hoverboard charging port. Make sure there is no blockage or damage to the ports.
  • Replace battery or charger – If the charging issues persist, you may need to replace the battery pack or charger unit. Consult the hoverboard manufacturer for compatible replacement parts.

Safety Features Activated

Hoverboards have various built-in safeguards like tilt sensors and overheat protection that can prevent shutoff if triggered. For example, if the hoverboard is tilted at too extreme of an angle, the sensors may force it to stay powered on as a safety precaution.

To address activated safety features:

  • Check the hoverboard orientation – Make sure the hoverboard is placed upright on a flat, level surface when attempting to power it off. Avoid any severe tilts.
  • Allow it to cool – If the hoverboard has gotten excessively hot from heavy use or charging, let it sit and cool off completely before trying to power down.
  • Look for error indicators – Some hoverboards will display error codes via flashing LED lights to point to specific safety mechanisms engaged. Check your user manual for the meaning of blinking lights.

Take Proper Precautions

Hoverboard

In some cases, a hoverboard that won’t turn off could signal a deeper electrical issue or safety risk. If none of the troubleshooting steps resolve the problem, stop using the hoverboard immediately and contact the manufacturer for repair or replacement options.

Never store, charge, or transport a malfunctioning hoverboard that refuses to power down, as the risk of overheating, fire, or explosion is drastically increased. Always take proper safety precautions with any hoverboard stuck in the “on” power mode.

Safety Risks of a Malfunctioning Hoverboard

Safety HazardPotential Consequences
OverheatingFire, burns, damage
Battery FailureExplosion, fire
Electrical ShortShock, fire

When to Seek Professional Repair

Signs to Stop Using HoverboardRecommended Actions
Burning smellStop using, unplug
Smoke or sparksStop using, unplug
Strange soundsHalt use, contact manufacturer
No response to troubleshootingContact repair shop or replace

Hopefully, this guide has provided the simple tips needed to get your hoverboard shutting down reliably again. But if the problem persists, don’t take any risks with a device that won’t turn off – consult a professional for repairs. Safe hoverboarding!

Available for Amazon Prime