How to create your own hoverboard as per the fantasy of the original hoverboard. Even if you cannot find the hoverboard to ride on it. Even then you will find a simulation at least.

To make a flying hoverboard following items are needed. The Iron Rod The Copper Wire The  Strippers The Duct Tape The D Batteries

This is the time to start the preparation for the flying hoverboard. * The Eight Holes. * The Drill Machine Work * 4 new Holes * Let’s Put the Base

The first is to find the holes. To look at the holes under the screw, first, you need to unscrew all the things placed on the hoverboard.

The first is to find the holes. To look at the holes under the screw, first, you need to unscrew all the things placed on the hoverboard.

Do remember that we need to do some extra work and this is to put an extra foot of wire with the iron rod. Let it be there and we will further discuss what to do with this.

The battery holders with the iron rod. But for this first, you need to attach the battery holders with the wires first...

This is a hypothetical model based on the simple principles of physics. The successful practical implementation depends on the ability of the person who is performing the project.